Noonan Equipment and Event Rental

Lightweight and powerful, the Mi-T-M 3500 PSI @ 3.5 GPM Honda GX390 OHV Cold Water CA Aluminum Series Gasoline Direct Drive Industrial Pressure Washer (CA-3504-1MAH) is an excellent choice for cleaning contractors who are on the move. Use it to remove old and peeling paint or mold and mildew from any surface.

Mi-T-M 2700 PSI @ 2.4 GPM, 196cc Honda GX200 OHV, Pressure Washer, 0 Degree, 15 Degree, 25 Degree High Pressure Nozzles, 50' Steel Wire Braided Pressure Hose, Light Corrosion Resistant Aluminum Frame, AR Crank Driven Pump With Brass Manifold & Thermal Protection, Professional Grade Trigger Gun With Safety Lock Off & 36" Wand With Rubber Grip

• Clears 1-1/4" to 3" lines and most 4" lines.
• Holds 50 ft. of 1/2" Flexicore^®
• Safety slip clutch protects cable and operator.
• 1/3 hp motor with momentary contact reverse switch and pneumatic foot pedal.
• Made in U.S.A.

The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up the stoppage. The shock wave bypasses vents and stacks to break-up clogs. You get instant impact with no pressure build-up. The built-in pump and
pressure gauge lets you choose the right amount of force for each job.

General’s professional three-foot Flexicore Closet Auger is the ideal tool for breaking up stoppages or removing lost objects in clogged toilet bowls. The durable double layer Flexicore construction gives the snake tremendous resistance to kinking. The Flexicore closet auger works where plungers fail.

The tough outer steel tube is 3/4" in diameter. Inside, a galvanized steel rod turns the cable. Other features include a vinyl bowl guard, vinyl grip handle and turning handle, and a "Grip Clip" for securing the cable.

• Cage 75 ft. of 1/2" cable.
• Turns easily on self-aligning oilite bearings.
• Large crank handle on back.
• Will work for 1-1/2" to 3" lines

Milwaukee portable band saw cuts up to 3-1/2 in. x 4-1/2 in. rectangular stock and 3-1/2 in. round stock 

6.0/5.0 amp, AC only 

Two-speeds: 200 and 250 sfpm 

Uses standard 44-7/8 in. x 1/2" x .020" band saw blades

The TILT-LOK™ handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 pounds and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.

• Powerful 15 AMP motor delivers 2,300 RPM for enough power to cut through pressure treated lumber
• Cuts 6x material at 90° and 4x material at 45° in a single pass
• Weight - 32.1 lbs
• Electric brake for maximum productivity
• Ideal for cutting large timber, pressure treated lumber and wood logs
• Large capacity blade cuts 6-3/16" at 90° and 4-3/16" at 45°
• Low noise level at only 87dB for quieter operation
• Blade stabilizer for stable blade rotation and superior cutting performance
• Large depth control lever for convenience and secure adjustments
• Large support handle for increased operator comfort and control

Senco Roofpro, 455XP-XtremePro Roofing Coil Nailer, 15 Degree, Wire Collation, Contact Actuation, Fasteners Used 3/4" Through 1-3/4", 5

This SN902XP framing nailer packs plenty of power, specifically engineered for demanding pros and environments. Built with enhanced features and superior components this tool is well balanced and lightweight. The true drive magazine reduces jams and misdeeds.

3/4" X 50' Tow Compressor Air Hose

1.2 HP Continuous 4 Gallon Single Tank Electric Hand Carry Compressor

Jet JPB-60lb Air Jackhammer

Jet JPB-90lb Air Jackhammer

Groover, Edger, And Magnesium trowel

Bosch 1-9/16" SDS-max rotary hammer and breaker

Bosch SDS-max Demlition Hammer

Bosch 1/2" Hammer Drill

Square End Magnesium Two Hole Bull Float with Universal Bracket

This electric all-round cutter minimizes the amount of water and slurry. Unlike other electric cutters, the blade rotates forward, cutting into the material efficiently with minimum effort on the operator. K 4000 is easily adaptable for dry cutting with the Vac attachment accessory for minimal dust generation.