Noonan Equipment and Event Rental

• Spring-loaded jaws of forged alloy steel provide fast, one-hand ratcheting.
• Tension plug holds head in any position up to 90° angle.
• Telescopic shanks on Models 1017 and 1019 quickly adjust for lengths from 10" to 17"

Compact equipment provides tremendous carrying capacities in a small package.

Move bulky, bagged or palletized material quickly and easily with the pallet fork attachment.

Adjustable forks load and unload, lift and carry, move and place materials around a variety of jobsites. With hydraulic pallet fork, position the forks from the operator seat for maximum operator comfort and efficiency.

Save time and labor costs by lifting, carrying, and moving with the pallet fork attachment. Put it to work on applications such as industrial plant and landscaping work, construction sites, farm chores, fertilizer handling, and municipal projects.

The DW713 10-Inch Compound Miter Saw has a 15 Amp motor delivering 5,000 rpm, extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2" of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

The Husqvarna Soft-Cut 150 saw is designed for residential and light commercial applications. The lightest gas saw in the Soft-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.

The lightweight and portable MK-370EXP Tile Saw is made to the highest professional specifications. It features a built-in adjustable 45° cutting head that allows for quick and accurate miter cuts.

A robust tile saw with a refined cart and rail system for perfectly straight cuts. The TS 60 is equipped with a patented water and slurry system for little to no mess. This includes an efficient recycling system that cleans water for reuse. Also, Elgard™ warns you of an approaching overload, and Electronic SoftStart™ allows starting with normal, slow acting fuses.

The MK-BX-4 uses a patent pending misting system to control dust generated during cutting. The ergonomically designed, easy to grip nylon handle with built-in lockable trigger switch handle allows for easy operation and control for either left or right-handed cutting. Unique features include a removable plastic tray and a locking table with an adjustable depth stop to prevent cutting through the table. Portable and lightweight, the BX-4 incorporates an Open-back design that allows for material up to 16" long and 5" deep to be cut and the plastic dust collection pan with replaceable dust filter make on site dust control a snap.

Masonry Saws are used for all kinds of installation applications like patios, landscaping, and decorative/commercial builds. This BB14 has an easy-cut guiding table. With its optional Pro-Cart allows operators to work standing or from the ground.

Centrifugal pumps designed to keep your jobsite dry. With its radial flow design and built-in contractor friendly features, this line of trash pump has redefined the quality and durability standards of self-priming centrifugal trash pumps. These 3-inch trash pumps can handle solids up to 1.5 inches

These centrifugal trash pumps have proven themselves on jobsites around the world. Pumps feature hardened ductile iron impeller and volute with patented pump cover, volute and volute insert providing a rugged, easy to maintain pump that will stay on the job longer. Units can handle solids up to 1.0 inch

The Tsurumi HS2.4S-62 is a semi-vortex submersible trash pump with agitator. The built-in shaft mounted agitator suspends solids. The urethane semi Vortex impeller is for maximum durability and pump performance. It features a double inside mechanical seal with sic faces that provides longest operational life. The oil lifter provides lubrication of the seal faces. (Patent pending) the V-ring seal protector protects mechanical seal from abrasive particles.

• For sinks, tubs and laundry drains up to 1-1/2"
• Slide-Action™ chuck built into grip shield.
• Automatically adjusts to different cable diameters.

• Band-It™ splashguard minimizes excess water spray from the spinning drum.
• Holds 25 ft. of 5/16" Flexicore® cable.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

• Clear tree roots and other difficult obstructions in 3" to 6" drain lines.
• Cage holds 100 feet of 5/8" Flexicore cable.
• Patented Quick-Grip™ chuck secures the cable during operation.
• Rugged cage cover protects customers from water spray from the spinning cage.
• Rugged powder coated steel frame.
• Special "roll bars" to protect the motor.

• Extra-long folding handle quickly locks in place.
• Rolls smoothly on big 10" ball bearing wheels.
• 1/3 hp capacitor motor with thermal overload protection.
• Momentary contact reverse switch to protect the cable.
• Safety features include: Air actuated foot pedal, ground fault circuit interrupter, and safety slip clutch.

Our FORCE/1 package processes up to 970 lbs of cellulose or 350 lbs of fiberglass per hour and weighs 177 lbs. The durability of this unit is enhanced with urethane seals, a direct drive transmission, and polyethylene construction which resists dents & dings, allowing for an attractive system appearance over years of use. This system provides ease of transportation to the job site in addition to timely installation of attic insulation - either cellulose or fiberglass -- at 3/4 of an hour for R-19 in a 1,000 square foot attic.

• No electricity required
• 99% direct-fired fuel efficiency improved by adjustable shut-off controls that also save fuel
• Lightweight design at less than 30 lbs with folding handle and wheels
• Hose and regulator included
• APROX 12HRS RUN TIME ON 20LB TANK (propane and tank available for additional cost)

This heater must be used in a well-ventilated area. Not safe for indoors. 

Standard 4-1/2" angle grinder for cutting or grinding metal, concrete or other small jobs. 

10.0 Amp AC/DC Bag 11,000 rpm motor designed for faster material removal and higher overload protection

With a retracted track width of 28 in., the ultra-compact Bobcat® E10 compact (mini) excavator accesses jobsites where exhausting hand labor is your only other option. You can easily navigate through narrower openings and operate in tighter conditions. Zero Tail Swing offers the greatest flexibility to slew and deposit spoil while offering the most protection against jobsite obstacles.

Canycom’s highly popular SC75 Concrete Buggy with a rubber track undercarriage transports concrete with ease over rough terrain causing minimal impact to the ground surface.

Heavy duty rubber tracks offer balanced weight distribution to travel with ease over wet, muddy ground, rough, uneven terrain and loose sand and gravel. Our SC75 Concrete Buggy outshines in efficiency and maneuverability compared to wheeled buggies, and has time after time proved to save the user costs in time, money, and energy.

Trailer available for transport at an additional cost. 

HEPA Drywall Vacuum, 8 Gallons 

The EZ Shear flooring shears are the ideal lightweight solution for professionals and do-it-yourselfers alike. 

• Cut flooring without noise, dust, or electricity
• WILL CUT UP TO 13" WIDE
  WILL CUT UP TO 8" AT 45 DEGREE ANGLE
  UP TO 5/8" THICK LAMINATE
  19LBS
  CAN ALSO CUT ENGINEERED HARDWOOD, VCT, RUBBER TILE, COVE BASE
  ---------------------------------------------------------------

PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds concrete, adhesives, paint, epoxy and spackle. With a grinding width of 11 in. it is suitable for small to medium concrete areas. Designed to facilitate an ergonomic work position, it is easy and convenient to use. The machine is light and compact and therefore easy to transport and set-up.

• A large capacity machine for 1-1/2" to 3" lines and some 4" lines
• Cage holds 75 ft. of 1/2" Flexicore® cable.
• Open cage lets you see cable condition after each rental.
• Patented Quick-Grip™ chuck tightens firmly on cable with just a quarter turn.
• Pneumatic foot pedal and ground fault interrupter for safety.

• Safety slip clutch protects cable and operator.
• Powder coated steel frame with folding handle and 10" heavy duty wheels.
• 1/3 hp motor with thermal overload protection.
• Momentary contact reverse switch.
• Made in U.S.A.

5,000 POUND CAPACITY
2.5" LOWERED HEIGHT
27" WIDE

Innovative demolition tool for the fast and easy removal of floor tiles, vinyl, and cork from concrete and wooden surfaces. No more struggling or bending trying to handle heavy electric breakers.